• Stainless Steel Plate

Stainless Steel Plate
Grade 304/304L, 316/316L & 4003/3CR12.
Thickness (mm) 5.0 to 50.0.
Width (mm) 1250 (grade 4003), 1500 & 2000.
Length (mm) 3000, 6000 & customer specific cut-to-length.
Finish 2B (to 8mm) & No.1 (HRAP).
Plasma profiles To customer drawings.

The information provided is for standard stock product and does not encapsulate all available combinations. Please contact your nearest Atlas Steels Service Centre if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

For more technical information there are excellent reference manuals and data sheets contained within the technical library of this website.

Stainless steel coil plate – ASTM A240M
The most efficient route for a stainless steel production mill to produce plate (5mm and over) is in coil form. The coil is then further downstream processed by the mill or through a service centre with equipment to flatten (often called ‘levelling’) and cut to length.

The maximum plate width produced by mills from coil is 2000mm and the maximum thickness is 13mm for hot rolled and 8mm for cold rolled.

Grade Thickness (mm) Coil width (mm) Finish
304/304L 5.0 1500 2B
316/316L 6.0 2000 No. 1
304/304L 8.0 1500 No. 1
316/316L 10.0 2000
12.0
3CR12 5.0 1250 No. 1

Stainless steel quarto plate products – ASTM A240M
Another method of producing stainless steel plate within and beyond the thickness range of coil production is from a slab of steel that is rolled in the flat condition to a specified length, width and thickness. The product of this process is commonly referred to as quarto plate and is available from mills in thickness from 5mm and above and widths to 4000mm in some thicknesses.

The standard grades and thickness for quarto plate are as follows:

Grades 304/304L, 316/316L, 3CR12.
Thickness (mm) 5.0, 6.0, 8.0, 10.0, 12.0, 16.0 & 20.0.
Width (mm) 1500 & 2000.
Length (mm) 6000.
Finish No. 1 (HRAP).

Quarto plate is commonly stocked as a dual certified grade, i.e. 304/304L and 316/316L.

Stainless steel chequer (floor) plate

Grades 304.
Thickness (mm) 3.18 & 4.76 .
Width (mm) 1219 & 1250.
Length (mm) 2438.

CLIENT RESOURCES

8 SERVICE CENTRES